IGK 130
Polyurethane Edge Sealant
IGK 130 is a two-component sealant, which was developed especially as a secondary sealant for multi-pane insulating glass. The product is solvent-free and contains absolutely no mercury-containing catalysts – which has been the case since 2001.
IGK 130 is characterised by its extremely good mechanical properties, optimal viscosity and very low water vapour and gas permeability. The service life of the mixers is extremely long.
The product can be applied without primer to glass and spacers in accordance with the usual guidelines. Its special rheological properties mean IGK 130 is perfect for both machine processing and manual feeding systems.
Mixing Ratio
by Volume: 100:10
by Weight: 100:7.1
Packaging
Base components: 200 litre drums
Hardener components: 20 litre or 200 litre drums
Storage
6 months in original unopened containers at between +15°C and +25°C
Avoid temperatures of over +40°C and below +10°C
Do not store outdoors. Protect from moisture, frost and direct sunlight
Transport
The same conditions apply for both storage and transportation.
